How to smoke jeans

Among the set of styles and sizes of trousers is difficult to find such a model that would be perfect, approached Rostovka. Illiterately shortened things lose their attractiveness, look chopped, spoil appearance. Stitching the product, it is better to save a decorative line laid along the lower edge of the stunner.

How to fix jeans for a typewriter

The processing of the lower edge is not a big work to the novice master, saves the service in the studio in the price. This requires an ordinary sewing machine. Even the rare model remaining from the grandmother is suitable. Threads used for sewing should approach the color to fabric or decorative finish. This material is better to choose immediately after buying things. Thickness should be such that the machine can be used the product. Symake factory line will not work. To give the Varenkov a done look, you can lose the seams with pembia.

Before smoking jeans, you should correctly measure the length in the finished form. Make the following:

1. Jump the thing.
2. Stand without shoes in front of a large mirror.
3. Excellence inside the inside, fasten with pins or needles. The fold line should be around the heels at the floor level. If shoes with a heel, you can apply the product, leaving it longer.
4. Put the shoes, check the result. If necessary, correct.

How to trim jeans and sunk bottom? Your actions:

1. Spread the product on a flat surface, racing along and across.
2. Swipe the final length using soap and ruler.
3. Set 1 cm down. Spend the second line.
4. Measure another 1 cm down before cutting jeans. Spend the third line.
5. Cut both pants.
6. Remove the stuffed thing inside out.
7. Make a bend on the first draw, then by the second.
8. Take a manually.
9. Loose smooth lines.

Method of felting jeans while preserving factory seam

Decorative line - an integral element of things. How beautiful to crop jeans for processing with the preservation of factory finishes, saving on the price of the service? Procedure:

1. Determine the desired length.
2. Measure the width of the bending on the wrong.
3. Spread the thing.
4. Squeeze from the outlined length up the width of the bending.
5. Swipe the parallel floor.
6. Set down 1 cm.
7. Draw a second line.
8. Transfer measurements to another pant.
9. Cut the trousers over the second line.
10. Set on the details with the factory line 1 cm from the bending.
11. Spend lines.
12. Cut extra.

Stitching jeans while preserving the seam is done like this:

1. Attach details with finishing to the sides.
2. Ensure sections, scroll from the sides and inside.
3. Sweat the parts with the leaf so that they do not shift.
4. Still 1 mm from the factory seam, as in the photo.
5. Make cutting in thick places per 1-2 mm to the lines.
6. Cut the battery of the bottom up to 3-5 mm.
7. Squeeze the edges to the bending, if the fabric is thin. For dense material, it is better to send an allowance in different directions.
8. Rign down a line of 1 mm from the factory seam.
9. Check the allowance.

Learn, beautiful and neatly.

How to shorten jeans without a sewing machine

Treatment of the lower edge of the trousers can be done manually. How to smoke jeans? Procedure:

1. Spread the thing.
2. Draw a chalk length of length in the finished form, focusing on the tags.
3. Put up the width of the factory bending.
4. Spend the second line.
5. Remove the thing inside out, join the iron.
6. Send the bottom to combine the decorative line and the second line.
7. Side the edge with neat stitches.
8. Cut extra material remaining on withc.
9. Change the edges.

Jeans Bearing Work

Processing the bottom of the product can be cheap in the studio. The argument in favor of professional binder is the large thickness of the fabric. An ordinary machine may not cope with such a task. Industrial equipment used by tailors in the studio is intended for these operations. The cost of binder nise product depends on the complexity of the work. The price of the service is from 180 to 800 rubles.