How it is right and beautifully to last Tulle at home

Cashing with decor, many mistresses are faced with the need to sunmate the curtains. Sometimes the tailing is necessary because of the natural wear of the fabric, when the corner acquired an inesttic appearance, but the curtain as a whole looks good. Today, the question of how to smoke Tulle can put in a dead end, this is due to the fact that with their own hands at home. Modern hostesses rarely produce accessories used in the design of the premises.

Also, knowing how to correctly sew telle curtains will help to correct the shortcomings of the product purchased in the store, as they are produced on a specific template, therefore, are not always suitable for the existing window access in length. Sew tulle is necessary when replacing eaves, because it is not always possible to find a completely identical option.

You can quickly and qualitatively, with your own hands, using the sewing machine. However, it is not always available for use, so it is important to know how to do this operation, using a thread and needle.

Special attention should be paid to the edges of the curtains. There are several non-hard rules, following which even at home can be achieved by quality comparable to the work of a professional. The first thing you want to do is pick up a thread suitable for the tone of the main fabric for Tulle is most often white color. If the curtains are made of a combination of tissues or inserts from bulk materials are applied, then before performing the main tailoring, the problem areas should be treated with a special seam called "Zigzag". If its execution is planned on the sewing machine, it is recommended to choose to the maximum step.

Another advice that will help to make curtains from Tulle perfect - use a special secret seam when ending the podium - is captured by a needle one thread base. In order to perform it with her own hands, it was most simply as possible, you can use a special function on the sewing machine.

The beam must be attached, then the work will be performed high quality and beautiful.

By producing work with your own hands, it is best to give preference to long and not too dense stitches in the process of marking the edges, it will also not be superfluous to use the pin. After this stage, the chart is required slightly to try. To avoid distortion, you can apply a small trick - pinch cloth with pins, for example, to a ironing board. A to avoid folds will help small weights, tied which, you can stretch the fabric. For tluel curtains, a special cord is suitable as a weighting agent, which needs to be evenly distributed over the entire length of the pent. The perfect distance for fixing the cord - 25 cm.

Stitching with your own hands: Stages of work

The first step is stroking the curtains from Tulle. Then they must be placed on the window opening. After that, you can proceed to the main work that starts with the measurement process - it is necessary to know the length of the curtain and reveal the place where it will be made.

Double bending - the most popular method of working with tulle curtains. The allowance will be 7-8 cm on each side and the same distance should be added to the length of the curtains.

• cutting line;
• line ready-made curtains.

Excess cloth should be carefully trimmed, then turn the allowance and fit the resulting bending with your own hands. The next step is stroking that will help remove all possible defects on the fabric. After that, it comes to handle the tulle with a secret seam.

First, the bottom of the curtains are processed, and then its side sides.

If the line is selected using a sewing machine, then you should prefer to pull the straight line. The stitch length should be about 2.5-3 cm. You can also carry out processing using Zigzag.

After that, the bending is turned on the "face" so that he only slightly opposed - not more than 3 mm. The fabric is leaned with light movements and stalks with the capture of the edge of the curtains. It is noteworthy that the thread will not be noticeable at all.

Seamless pattern

After performing the curtain curtain with your own hands, you can apply a secret that does not leave even a lightweight seam on it - this method is called "seamless label". It is performed using conventional adhesive tape or "Ceatinki", applied along the entire length of the curtain. For fixing it is necessary to use a hot iron, which slightly stares the place of the tissue connection.

If the tulle base has a lining, it is important to remember, making it with your own hands that the work is performed without taking into account the lining, that is, only the basis is stitched, because otherwise the seam line will turn out to be thick. You should leave the allowance for 12-13 cm and trim the scope. The lining is cut off so that it becomes shorter than 12 cm. In order for the corners of the curtains to be smooth, it is required to make a side junction of the tissue. Then the lining is required to stroke and make a double bending - by 5 and 7 cm, unscrew and sunk to the lining. The secret seam in this case is performed by a single bending of the seal curtains and lining, the method is determined to each other using a straight line.

Sometimes it is possible to produce work using decorative elements, such as tapes, braid or fringe. Also perform a double bending of the bottom of the tulle. Thus, knowing all the methods of stove of tusle curtains, you can make the perfect window decor and room in general. As can be seen, there is nothing complicated in the work, it is necessary to show a little attention and do not rush anywhere during work, then the result will be worthy of praise.